Month: April 2021

    The following requirements are to be considered as an integral part of the technical specifications for each equipment type.   The system offered shall be designed to operate normally under the conditions of different regions in Kenya. These conditions may include but not limited to power supply, temperature, […]

Equipped with main combustion  chamber and a second chamber  for reburning  designed to ensure  complete combustion  of the gases  resulting  from  incomplete  combustion  of inert gases in the chimney, within the standards recommended  by the World Health Organization;   Equipped with temperature controller to adjust the air of the combustion […]

Incinerators used will be limited to daylight hours of operation. This includes shutdown, cleaning and maintenance.   Waste streams shall not be mixed during the incineration process and the ash collection chamber will be cleaned when a different waste stream is to be incinerated. The Company will provide the contractor […]

5-1- Chambre de post combustion est installée au dessus du foyer  de combustion , elle  est constituée d’un cylindre  métallique  revêtu intérieurement d’une couche d’ isolant et d’une couche de matériaux réfractaires. 5-2- Volume intérieur?: 2,1 m3 Est dimensionnée pour pouvoir  garantir  un temps de fumée de 2 secondes à […]

It must be a 3 chambered burner The loads ability of 250 kg The realty for the incinerator requirement to be able to stand up to the temperatures and additionally different other useful demands. The smokeshaft should certainly have a solid refractory cellular lining of special type of concrete to […]

Capacité destructive de 55 Kg/h jour de déchets hospitaliers  avec un p?.c. i jusqu’à 3.200 Kcal/Kg 1)Type de déchet hospitalier 2)Pouvoir calorifique inférieur                                                                        3.200 kcal/kg 3)Humidité                                                                                                          20% 4)Teneur  en cendres et/ou inertes                                                                       8% 5)Capacité destructive nominale                                                                         55 kg/h 6)Volume chambre de combustion                                                                     1,65 m3 7)Volume chambre postcombustion                                                                   2.1 m3 8)Temps  […]

Operational Capabilities   PROCESS MINIMUM 1 TON PER DAY OPERATED WITH LIMITED TRAINING REGULAR MAINTENANCE CAN BE COMPLETED WITH LIMITED TRAINING COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS ABILITY TO BURN WASTE LUBRICANTS (POL) HANDLE ORGANIC SOLIDS (TO INCLUDE RMW) DEPLOYABLE MOBILE 24 HRS OF CONTINUOUS USE AUTOMATIC LOADING […]

Incinerate: medical waste and general waste Capacity to burn waste: 400 — 500 kg/hr Fuel: Diesel Fuel Consumption: 10 litres/hr maximum Incineration temperature: 950 – 1300 °c Casing: thick (min 5 mm) Stainless steel casing and fully insulated to withstand sea humidity Voltage: 220/240 V or 380/415V Frequency: 50 Hz […]

The manufacturer must provide a declaration that the pressure vessel is manufactured in accordance with relevant guidelines for pressure equipment.   Following accompanying documents should be supplied with the treatment system and shall be available at the Site:   1.Operation instructions (including process description). 2.Loading and maintenance procedures. 3.Short-form of […]

Manual autoclave with vertical loading; gravity displacement type with possibility for Vacuum.   Capacity:      Up to 12 kg/h   Chamber size:      >150 liters   Material:       Stainless steel   Temperature:       134 °C   Further information:   Minimum autoclave chamber size shall be 150 liters and shall have a usable volume (loading […]

combustion chamber and one flue gas afterburning chamber. The incinerator must be able to meet the following parameters:   1.Treatment capacity of: a) 50 kg waste per hour.   2.Temperature: Main combustion chamber up to 850°C, and in the second chamber > = 1,100 °C   3.Retention Time: 2 seconds […]

Physical /Chemical Characteristics: Boiling Point (_F) :  N/A                     Appearance & Odor: Off white, odorless Vapor Pressure(mm Hg): N/A        Volatiles (% by weight): N/A Vapor Density (Air =1) :N/A         Evaporation Rate )n-butylacetate=1): N/A HMIS Classification : Health:1; Flammability: 1   Reactivity Data: Stability: Stable Conditions to Avoid: None Know Incompatibility […]

1.Solidifier (Fluid waste disposal product)   Liquid Waste Solidifier for Water Based Special Features of Solidifier 2lb bottle Effectively solidifies potentially serious infectious waste quickly Quickly8 penetrates to solidify blood and body fluid to convert Gels in seconds No shaking required Retrains solidity to prevent spills and leaks for safe […]

HICLOVER, Nanjing Clover Medical Technology Co.,Ltd, supply system solutions for medical environmental protection, animal and pet cremation engineering, other municipal solid waste incineration project. We supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators for laboratory, clinic, hospital, medical center, hygiene clinical waste destruction […]

We are looking for small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr, 20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital wastes) per day or per hour. Should it be with no smoke, no fumes, […]

Combustion Efficiency     99.99% Retention time    Of the flow gases not less than 2 Sec in the hot portion. Excess Oxygen concentration  Of primary combustion chamber 3-6% max. Refractory    The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than […]

Ensure flame contact with all gases is achieved. –yes Ensure residence time is not less than two (2) seconds. –yes Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.—1000-1200 oC   Ensure the oxygen […]

Class 2          Industrial Incinerators Class 2A:    Commercial Incinerators for the disposal of waste that contains hazardous, potential hazardous and bio-medical waste where the operator exceeds 100 Kg/day. Dimensions: 2.2m(l) x 1.5m(w) x 2.5m(h) Fully automatic computer multi control system. Fuel Options- Diesel and natural gas, electricity Wasted fuel- >12L/h […]

?Incinerate minimum 80kg/hr X 12 hrs per day ?Disposal of both non-hazardous and hazardous waste streams (per waste inventory) ?Mobile Unit (Skid mounted preference with lifting points) Design/Specifications ?Incinerators must have a secondary combustion chamber with a minimum temperature range of 900c ?Liquid waste streams shall be incinerated by an […]

The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances.   Cadmium and compounds as     Cd Mercury                                      Hg Thallium                                     Tl   Chromium                                  Cr Beryllium                                    Be Arsenic                                       As Antimony                                    Sb Barium                                        Ba Lead                                            Pb […]

Heater 20 Kg Burner electrically ran containing: A cage for receipt of biomedical waste; A burning chamber with fireplace with a filter to preserve ashes; A cover; An air supply; A wind generator allowing supply air. Burning temperature: 1800 ° C. Consists of all gadgets. ▪ The burner ought to […]

Intermittent Feed (w/optional loader): .9 yd3/hr (.7 m3/hr) up to 8 hrs/day         Specifications: Length overall -9′-6″ (2896 mm) batch system w/o loader         18′-6″ (5639mm) w/optional loader system Width overall -7′-6″ (2820mm)         Height (w/o stack) -10′-0″ (3048mm) Approx. Weight […]

.Necessary tooling and gauges shall have also to be supplied.   14.Supplier shall have to arrange free training for user staff in operation and maintenance   15.Supplier shall have to provide related drawings/diagrams (civil, mechanical and electrical etc.)electrical load and electrical circuitry   16.Warranty period shall be 24 months from […]

Nanjing Clover Medical Technology Co., Ltd. Tel: +86-25-8461 0201 Fax: +86-25-8461 0406 Website: www.inciner8.cn Email:  [email protected] Service Skype: clover-incinerator Pусский: www.hiclover.ru 中文: www.haiwo.net  Photo Gallery: www.eclover.net  Clover News: www.incinerator.info Facebook: www.facebook.com/hiclover  Twitter: twitter.com/hiclovercom   YouTube: youtube.com/c/IncineratorClover Send Message by below contact form: Contact Form  

Q: what is kind of waste can use in this equipment? A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste.   Q: Incinerator Smoke Standard A: China Government Standard: No.GB18484-2001.   Q: Treatment capacity A: Average […]

Waste Incinerator International Market Analytics Date. Jun. 10, 2012   Key Word: small incinerators medical waste incinerator pet animal cremation incinerator incinerator manufacturers     Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below: […]

Nanjing Clover Medical Technology Co.,Ltd. local in Nanjing city, China which is near to Shanghai port. We are Waste Incinerator Manufacturer in China. We produce medical waste incinerators, pet animal cremation equipment and othe solid waste incinerators. The burning rate from 10kgs,20kgs,30kgs,50kgs,100kgs,150kgs,200kgs,300kgs,500kgs,600kgs per hour, the daily treatment capacity up to […]

CSH Wellness Facility, (Calabar, Nigeria) Mmedical waste burner qualified of obtaining rid of roughly 0.5 cubic meter of pathological or contagious waste. Burner to have twin burning chamber as well as control amount of dioxin as well as various other gasses discharged without being damaging. Approximated measurements, to distributors common, […]

incinerator providers.7) Burn cost: 15 – – – – 20 Kg/h 8) Ability: very little less than 130 L. 9) Concentrations of numerous contaminants in heap gases listed below discovery limitations. 10) Gasoline. 11) Electronic system control. 12) Easy to run and also really little training. 13) Any kind of […]

heater for medical waste.Controlled air clinical waste incinerator produced for incineration of bio-medical waste created at a blood-processing center. The waste to be handled mainly includes bio-waste (i.e. physical fluids), transmittable and likewise polluted products such as syringes, needles, as well as other clinical waste (i.e. silicon rubbers, plastic, fabrics, […]

Usage diesel, construction in repainted steel resistant aluminium at heats up, fire device control indication, billing indicator, temperature level control gadget, melting ability of 250 kg/ hr in 2 phases (2nd and primary electronic camera). INCINERATEUR BURNING DEVASTATION OF MEDICAL WASTE PYROLYTIC AND ALSO LABORATORY. 1. CAPABILITY OF GARBAGE DISPOSAL: […]

Medical waste incineration system of 300 kg/hr lost price with double gas (gas along with diesel) type, everyday 8-16 hrs treatment and also a stack altitude of 15 meter.Primary burning i. The primary combustion chamber will be accepted as the crucial burning area; ii. The marginal burning temperature of the […]

installment of waste non reusable system in airport.Incinerator with oil heater Capability 2 ton/day, Oil storage tank 300 l Oil pump 0.4 Kw, Heating unit 0.2 Kw. Variation: YD Collection. – Diesel heater. It will definitely have usually paper, cardboard and likewise food, though also it will absolutely blaze medical […]

a DUCK farm burner, we require to acquire a tool size incinerator for organic waste, a lot more specific DUCKS.an animal dog crematorium in ireland.Equipment Double chamber medical infectious waste burner Capacity 10-30 kg per hr Features of waste The list listed below average features are thought about *: residence […]

Types of burner style appropriate: Dual-chamber regulated air heater or double- chamber pyrolytic incinerator Products of building: The incinerator shall not have any type of type of asbestos, asbestos-containing compounds, mercury thermostats, as well as additionally mercury switches. Refractory products shall have the capability to satisfy pertinent standards under ISO […]

Main as well as extra burners: Different electrically spark-ignited major heating units along with second heating systems with automatic control will certainly be used to accomplish the specified temperature level needs in the additionally added as well as major chambers. The fires of the main and also additional heating units […]

PRIMARY CHAMBER Durable steel casing Top-notch refractory cellular lining and also insulation Large complete measurement leading loads counteracted door 1 x oil/gas terminated ignition burners ran on/off SECONDARY CHAMBER Tough steel casing Premium refractory lining as well as also insulation 2 second gas residence time 1 x oil/gas discharged ignition […]

•    A burn rate of 25 – 30kg/hr. •    Consists of two chambers to ensure significant reduction of emissions and be capable of temperatures in the range of 800-1000˚c. •    Incinerator must be of a low maintenance design, be diesel fuelled and need no more than 15 amp 220-250 V […]

Carburant Diesel Capacité (M3) 1.92 Ave Capability 1200kg Consommation (litre/heure 12 Dimension externes Longueur (mm) 3110 Largeur (mm) 2150 Hauteur (mm) 3200 Ouverture Porte 1000×× × × 2000. Dimension internes . Longueur( mm )2200. Largeur( mm) 1050. Hauteur( mm) 800. Optimum température d’opération 1320. Température de suivi oui. Thermostat oui. […]

3 Medical Waste Incinerator of 20 kg/hr capacity with twin burner.Medical Waste Incineration Equipments. Our purpose for this task is to establish a plant in order to blaze Medical waste with 50 ton/day capability. Waste monitoring Heater * Outside dimension at base 6ft 1.8 m. * Outside size at leading […]

Single and also Double Chamber Medical Incinerator.durable and incredibly dependable burners with numerous capacities for hospital/medical waste, cremation in addition to numerous other solid waste therapies. Chamber Dual Burning Rate 10 kg per hour (for 2 incinerators) Burning Price 20 kg per hr (for three heaters) Packing Method Manual No […]

contaminated materials high temperature burners for the treatment of contaminateds materials. The waste will definitely be blended, including medical, oily wastes, woods as well as lab wastes. Key burning Diesel/LPG/LNG burning primary burning chamber/primary burning location Extra burning House time in the second chamber very little less than 2 secs […]

The incinerator will certainly have chimney, castable premium refractory cellular lining in addition to heater shell, perforated blind for the major along with additional burning chambers and also air blood circulation system. The heater shall also have the following:-. – – Ash door. – Main as well as additional heating […]

MEDICAL WASTE INCINERATORS for providing, setting up, readjusting, as well as likewise screening promptly controlled air clinical waste burners having a capability to melt 75 Kg/hour waste products of pathological and also organic nature. The procedure of incineration offers the benefit of quantity reduction together with the ability to discard […]

Items/Model TS30( PLC) Image Burn Rate Typical 30 kg/hour Feed Capability Typical 60kg per feeding Control Setting PLC( Programmable Reasoning Controller Burner) Vehicle Control and also Present Combustion Chamber 330L Inner Dimensions 75x75x60cm Secondary Chamber 180L Smoke Filter Chamber Yes Feed Mode Manual Feeding Voltage 220V Power 0.5 Kw Oil […]

Light Weight Small-Scale Medical, Mobile Optional Type Related Large General waste incinerator Burn Rate up to 250kg per hour Incinerator capable of treating between 300 & 500 kgs fitted with the wet scrubber system Waste Incineration HICLOVER Model TS75 Gasified incineration for melting medical wastes incinerator www.clover-incinerator.com HICLOVER.COM https://www.youtube.com/watch?v=BxiEa3XYvBs Contact […]

Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  Shipping Volume Shipping Weight Delivery Location TS30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks 5 m3 3000 kgs Shanghai Port TS50 average 50kgs per hour Average 250 […]

HICLOVER Medical Waste Incinerator in Stock(Finished and Semi-finished and New Production) Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  TS30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks TS50 average 50kgs per hour Average 250 SickBed […]

HICLOVER Medical Waste Incinerator in Stock(Finished and Semi-finished and New Production) Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  TS30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks TS50 average 50kgs per hour Average 250 SickBed […]

HICLOVER Medical Waste Incinerator in Stock(Finished and Semi-finished and New Production) Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  TS30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks TS50 average 50kgs per hour Average 250 SickBed […]

Items/Model TS50( PLC) Picture Principle Solid Waste Incineration Burn Price 30-45 kg/hour Control Setting PLC( Programmable Reasoning Controller Incinerator) Burning Chamber 560L Interior Measurements 100x80x70cm Secondary Chamber 280L Smoke Filter Chamber Yes Feed Mode Manual Voltage 220V Oil Usage (kg/hour) Ordinary 13.3 Gas Intake (m3/hour) *** Temperature Display Digital Display […]