Month: January 2017

Single and Dual Chamber Medical Incinerator.durable and highly efficient incinerators with various capacities for hospital/medical waste, cremation and other solid waste treatments.   Chamber Double Burning Rate      10 kg per hour (for two incinerators) Burning Rate     20 kg per hour (for three incinerators) Loading   Method   Manual No of Burners   Single […]

3 Medical Waste Incinerator of 20 kg/hr capacity with dual burner.Medical Waste Incineration Systems. i’m interested to destroy about 200 kg remains. a Medical Incinerator project for Tehran municipality. Our purpose for this project is to establish a plant in order to incinerate Medical waste with 50 ton/day capacity. a […]

Carburant Diesel Capacité (M3) 1.92 Ave Capacity 1200kg Consommation (litre/heure 12 Dimension externes Longueur (mm) 3110 Largeur (mm) 2150 Hauteur (mm) 3200 Ouverture Porte 1000×2000 Dimension internes Longueur (mm) 2200 Largeur (mm) 1050 Hauteur (mm) 800 Opération. incinerator small to medium waste dispossal for about 150-200 municipal waste from shopping […]

•    A burn rate of 25 – 30kg/hr. •    Consists of two chambers to ensure significant reduction of emissions and be capable of temperatures in the range of 800-1000˚c. •    Incinerator must be of a low maintenance design, be diesel fuelled and need no more than 15 amp 220-250 V […]

PRIMARY CHAMBER Heavy-duty steel casing High quality refractory lining and insulation Large full size top load counterbalanced door 1 x oil/gas fired ignition burners operated on/off SECONDARY CHAMBER Heavy-duty steel casing High quality refractory lining and insulation 2 second gas residence time 1 x oil/gas fired ignition burners operated on/off […]

Primary and secondary burners: Separate electrically spark-ignited primary burners and secondary burners with automatic control shall be used to achieve the specified temperature requirements in the primary and secondary chambers. The flames  of the primary and secondary burners shall not impinge on the incinerator walls or floor. The primary combustion […]

Types of incinerator design acceptable: Dual-chamber controlled air incinerator or dual- chamber pyrolytic incinerator Materials of construction: The incinerator shall not have any asbestos, asbestos-containing substances, mercury thermometers, and mercury switches. Refractory materials shall be able to meet relevant standards under ISO TC33 and CEN/TC    187.Waste feed system into the […]

a DUCK farm incinerator, we need to buy a medium size incinerator for biological waste, more specific DUCKS.a pet crematorium in ireland.Equipment Double chamber medical infectious waste incinerator Capacity 10-30 kg per hour Characteristics of waste Mainly syringes and needles from immunization routine and campaign activities. However, the following average […]

installation of waste disposable system in airport.Incinerator with oil burner Capacity  2 ton/day, Oil tank 300 l  Oil pump 0.4Kw , Burner 0.2Kw Model : YD Series Country of Origin : ITALY.-          Diesel incinerator. –          25Kg/h. It will have mainly paper, cardboard and food, though also it will incinerate medical […]

A flue chimney, 15,000mm long and 560mm diameter shall be constructed from steel sheet, complete with lagging, damper and rain water protection cone.  The chimney shall be lined with castable grade diatomaceous concrete mixed with high alumina cement in accordance with BS 4076: 1989. The damper will control the closing […]

The incinerator shall have chimney, castable high quality refractory lining and incinerator shell, perforated blind for the primary and secondary combustion chambers and air circulation system. The incinerator shall also have the following:- •    Ash door •    Primary and secondary burners and fans •    Temperature indicator devices •    Electrical wiring […]

Biological and Pathological Waste Incinerator is defined as human and animal remains, such as organs, animal carcasses, and solid organic wastes from hospitals, laboratories, slaughterhouses, animal pounds, and similar sources. This type of waste contains up to 85 percent moisture and not more than 5 percent incombustible solids, and has […]

MEDICAL WASTE INCINERATORS for furnishing, installing, adjusting, and testing automatically controlled air medical waste incinerators having a capacity to burn 75 Kg/hour waste materials of biological and pathological nature. The process of incineration provides the advantage of volume reduction as well as the ability to dispose of recognizable waste and […]

We strive for a sustainable development therefore we are adopting a sustainable medical waste management system, which includes building a modern sustainable incinerator that will not only cater for our facility but also for the other facilities in the larger area of the region. We are aware that we need […]

an incinerator for food waste and polythene waste management. as per our requirements we would like the YD 15C small incinerator.Mixed Biomedical waste Incinerator.Contract period:To be decided by the supplier Payment terms:100% prepayment through bank TT after signing of contract. Please confirm your willingness to execute this contract project by […]

Incinerator model A Burn Rate 65kg/h minimum Weight (kg), please indicate: Secondary Chamber Gas Retention Time – 2 Seconds Fuel – Diesel/LPG/LNG, please indicate Power Supply for Control Box – 220V-240V 50Hz single phase Minimum operating temperature 850 °C, please indicate One year Spare Parts Package for complete maintainability 10m […]

INCINERATOR DESCRIPTION The Model is for up to 300kgs capacity per batch load and will burn at around 55kgs per hour. The unit has top loading design and has a heavy duty refractory cement lining for maximum heat retention. Unit have large top lid for easy loading, and specially designed […]

Primary combustion Diesel/LPG/LNG burning primary combustion chamber/primary combustion zone Secondary combustion Residence time in the secondary chamber not less than 2 seconds Both primary and the secondary temperatures maintained until all the waste has been completely combusted Chimney Chimney with a minimum height of 4 meters above ground level Minimum […]

Incinerator Type: Containerized, diesel fueled Burning Rate:100–120kg/hour Minimum Operating Temperature:850o C(primary combustion) Maximum Operating Temperature:1450 oC(Afterburner chamber) Secondary Burning Capacity:Compulsory Density Insulation:20mm High Refractory Casting:Minimum 65mm Heavy duty refracting lining to withstand:1500 oC Average burn out time :maximum:3 hrs Fuel type:Diesel Fuel Consumption in L/hr:7.5 to 9 Residence time in […]

Gasified incineration for burning medical wastes. Fuel type: Natural Gas Burning Capability: –     30-50 kg/time –     Daily 3-6 times Incinerator size:  max 2000x1200x3200 mm Burning room volume: –     Gasification room max 0.7 m3, –     Secondary burning room max 0.5 m3， Size of the filling entrance: max 650×850 mm Air blower: […]

Load Capacity minimum:  1500 kg Burner fuel type:  Diesel Burner fuel rate max.:   20-25 Liter diesel/ per hour Burners minimum: 3 Burning rate minimum: 200-300kg/per hour Furnace bar area minimum: 2 м3 Fuel tank capacity minimum: 300L Main chamber burning temperature min. 1100 0C Afterburner chamber burning temperature min.  1300 […]

Main unit Application    For incineration, general and pathological Capacity      50 – 60 kg/h burn rate Type    Two  combustion chambers type; primary  and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit Operating time                   Minimum 8 hours daily Operating temperature        From 850 0C to 1200 […]

incinerate mainly pharmaceuticals ( all types of dosage forms … syrups, tablets, injectables ) medical consummabables, and also biological fluids … Capacity around 10 kg/ hour. install a diesel fired incinerator that can accommodate a batch load of up to 100 kg with a daily burning requirement of up to […]

BIOHAZARD DISPOSAL: CONTAINER GENERAL INCINERATOR, IDEAL FOR INCINERATION OF VARIOUS TYPES OF WASTE, FULLY CONTAINERISED IN A 20 FT CONTAINER, TO INCLUDE BUILT-IN FUEL TANK AND GENERATOR. TECHNICAL SPECIFICATIONS: COMBUSTION CHAMBER VOLUME (M3); 0.54 m3. SUGGESTED BATCH SIZE: 60 KG, BURN RATE: 69 KG PER HOUR, AVERAGE FUEL CONSUMPTION 13 […]

an animal cremator for our business in malaysia.currently we are doing individual private cremation and mass cremation for pets as well as medical waste.an incinerator which is capable of burning between 3 to 5 tonnes per day of mixed waste products, plastics, rubber, flammable putrescible waste, medical waste, rubber tyres, […]

an incinerator which is capable of burning between 3 to 5 tonnes per day of mixed waste products, plastics, rubber, flammable putrescible waste, medical waste, rubber tyres, paper and cardboard, textiles, green timber waste etc. As some of the waste products will contain non-flammable solids, the incinerator should be capable […]

The Contractor shall provide a Cremation System package for  TWO (02) Cremators and system approved by related authority, which must fit into the allocated area as shown on the plan drawings. The work shall include but not limited to design preparation, authority design approval, supply, fabricate, construct, commissioning, testing, operational […]

incinerators that can handle Bio-Medical waste (red bag) from research laboratories with level 2 and 3, animal research, and hospitals.  There are also a small amount of Pharmaceutical waste to be destroyed.  I would like your recommendations on what incinerators would handle the these requirement based on the following monthly […]

The first is a small 20kg/per hr incinerator for a small-medium sized hospital, and the second is a 500kg per/hr incinerator for a company planning to start a incineration service in Lahore.Burn Rate : >200 kg per hour Average fuel consumption : ~29 kg per hour ( Or lesser) Gas […]

HIGH TECH PYROLYTIC MEDICAL WASTE INCINERATOR 1.   Capacity of destruction in weight: 60 Kg/h. 2.   It should be able to operate not less than 10 hours/day 3.  This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc… 4.  Design Specification : Types […]

medical waste incinerator solutions and prices for 100 bed / 500 bed / 1000 bed / 3000 bed hospitals. – Assumption: general hospital beds 50%, operation beds 50% for the 100 bed hospital case, while this ratio is 30-70% for the other cases –  international standards and waste creations assumptions […]

Automatic loading and reloading with capacity of 10 to 12 tons per day working with gas treatment methods and gas fuel and should comply with the European Standards.the Government Hospital for Medical Waste Incinerator with the following Specifications. they are having general wastes like tissues, plastic bottles etc ,wastes coming […]

51.No    Features    $_pecific tions 1    (Incinerator) Type of waste for disposal    Animal  body  parts，other  biomedical  waste，organs dung， bedding materials，plant p缸ts and food itemsι Incinerators for conversion of waste to fine，white sterile ash with no visible smoke or odour 2.    Load capacity    300 – 4∞Kg (maximum) 3.    Bum capacity    100 Kgjhr […]

incineration Furnace for burning patalogical  ( such as human tissue or blood ) as west The weight  of this west materials is 700 kg per month and we need an  isolated furnace Without fume and any harmful gas . INCINERATOR SPECIFICATION # Description Specification 1    Burning Capacity – 400 kg/time […]

We have a 70 bed hospital in namibia. however there is a potential of getting customers from other local doctors. a small incinerators (ex. please see attached) for some empty chemical bags. Can you please provide me with some details information about these type of incinerators (small scale). a pet […]

Requirements and specifications for the process of supply, installation, operation and guarantee the three incinerators for burning and incineration of drugs and toxic substances for customs department Free three years guarantee for incinerators from delivery date. In addition of free spare parts guarantee letter should be valid for 10 years […]

Our interest is for disposing mainly cytotoxic waste, namely out of date or out of specifications cytotoxic pharmaceuticals. Other wastes for which we’d like to dispose along with the cytotoxic waste consists of out of date or out of specifications psychotropic pharmaceuticals (but not necessarily narcotics), sharps (needles) etc. It […]